Take the 2-minute tour ×
Role-playing Games Stack Exchange is a question and answer site for gamemasters and players of tabletop, paper-and-pencil role-playing games. It's 100% free, no registration required.

A 'phys-rep' is something used by a LARP to phys-ically rep-resent something that isn't present at a game. For instance, in a local system I play in, a red hat "phys-reps" being invisible. (I don't know how universal the term is.)

The question at hand is how does one go about phys-repping a large creature? I've seen several attempts at this, though none of them seem to be satisfactory. Most of the methods I've seen rely on using multiple "monsters" (NPCs). But where I LARP, most of the pathways are very narrow, making this technique unsuitable.

Are there any other ways of representing a creature like a Giant or Troll, which has width as well as height and length.

share|improve this question
3  
Question : if the pathway IS narrow, is a Large creature supposed to fit in to begin with ? I mean, on a P&P game with minis, a Large creature actually can't fit where two Medium creatures won't. Is there any hard rule transition about this in your LARP ? (I never LARPed but it would seem like a logical decision to me) –  Nigralbus Dec 12 '11 at 15:18
    
There are no rules for this in the LARP system we use. I'd like to fill up the path in the narrow section, whilst in others there's room for the party to surround. I'd also just like the creature to look large and intimidating! –  Pureferret Dec 12 '11 at 15:49
    
@Pureferret Have any friends who are good with stilts? –  C. Ross Dec 12 '11 at 18:23
    
Not really an option, the forest we LARP in would eat stilts for breakfast and go looking for seconds. –  Pureferret Dec 12 '11 at 18:24
3  
Or good costuming skills: look at the blue monster here and a golem here –  Scrollmaster Feb 19 '13 at 2:44
add comment

7 Answers

up vote 13 down vote accepted

Take a page from The Lion King and Avenue Q

For the lion King:

Lion King Puppetry

They have puppets controlled by actors dressed to match he pattern on the coats. Instead of going for a Beauty and the Beast level of theatrical similarity, the showing of puppets-as-puppets allows audience members to choose to suspend their disbelief without needing to convince them that rubber-forehead aliens are lions.

For avenue Q, the actors playing the Monsters all wore pure black, though again with slight style changes that evoked their characters:

Avenue Q

For a larp, a puppet of the creature you're impersonating can do the same thing. Make sure that you capture its face and arms, and use the arms to give it the necessary sense of size. If you suggest details through lightweight components (ala lion king) instead of trying to render the entire monster, you can allow people to interact with it without needing to spend the time to model the whole thing.

In terms of giving a large size impression, simply model its features on an appropriate scale, and insure that the bounding features are all present. Arms, legs, and shoulders&head should be sufficient to give it a sense of size. By strapping its legs to your shoes, offset by divots, you can simulate its baseline stance and shoulder width. By having its arms on poles, you can simulate its reach, And by giving it a head, you give players something to make eye contact with instead of you.

share|improve this answer
1  
Additional note: I've seen the Avenue Q puppets used in a LARP. It went very well. –  Tynam Aug 17 '12 at 8:20
add comment

I've seen large creatures represented using lengths of cloth, held on poles, by two or more people. Think of the way dragons are represented on parades.

This works really well. It's been used by theatre companies for all sorts of mythical or dreamlike creatures. It's a good combination between physical representation and players' imagination.

share|improve this answer
    
I really like this idea, but I'm struggling to visualise it. How is the cloth incorporated into the creature? –  Pureferret Dec 11 '11 at 21:40
    
Something like this. 2.bp.blogspot.com/_8cf3ZIrX12w/SWtzKee_RiI/AAAAAAAABr0/… –  Jadasc Dec 11 '11 at 22:20
    
Ahh I see now! I shall go reform my question. –  Pureferret Dec 11 '11 at 22:22
    
Yes, I also was part of such a monster once, it was real fun and the players were really impressed. It was basically just a wooden frame with clothes all over it, and I'm still very impressed by the people who built it. –  Bobby Dec 12 '11 at 20:35
add comment

Okay, some friends make this guy a long time ago. But I've never seen a better large monster, ever. He's a stone golem, constructed from 4" thick foam mattresses, hot glue, and paint.

The best thing is he completely covers a large man in 3" foam, so he's all soft and safe :)

Video here: Stone Golem Rocks YouTube

Stone Golem

This monster was built with 5 foam mattresses stuck together using a lot of hot glue. The cracks were carved out with box cutter knives and it was painted with many many cans of black spray paint. It lasted about 5 years, has appeared in a music video and has an account on facebook.

share|improve this answer
    
That's very cool, but there is no way for me to replicate it from your post. Do you have a guide that goes with this? –  Pureferret Feb 18 '13 at 21:51
3  
Sorry, no. But It was built with 5 foam mattresses stuck together using a lot of hot glue. The cracks were carved out with box cutter knives and it was painted with many many cans of black spray paint. –  Derek Tomes Feb 18 '13 at 22:04
1  
That's worth putting in the answer! –  Pureferret Feb 18 '13 at 22:07
add comment

"Jabberwock" creature made from pool noodles; photo (c) 2013 Elena Ruyter

My alma mater has a yearly large-scale boffer event where all the equipment comes from a pretty small budget. Here's a picture of a "Jabberwock" creature, constructed from duct tape and pool noodles. I think it's a good example of a larger-than-human "phys-rep" creature that can still engage in fights with other participants.

"Jabberwock" creature made from pool noodles; photo (c) 2008 June Xie

The approach you see here is to "capture its face and arms, and use the arms to give it the necessary sense of size," as Brian suggested. The arms (barely pictured) are two-foot-long claws that the player holds in his hands. The head is attached to a long, flexible pool-noodle neck; the player can move his torso to make the head bob about or snap forward like it's attacking. The creature looks fairly imposing when you spread your arms out and the head is at its full height; despite the relatively small size of the overall apparatus, the reach of the claws and neck makes it "feel" big during combat.

This approach is a good fit for creepy, sinuous monsters. The monster moves quickly and the basic rig isn't particularly exhausting to wear (at least, until you "dress it up" more). The simple one in the pictures — a high-visibility neon armature intended for a big nighttime event on a small budget — took several hours and around $20 of materials to construct.

share|improve this answer
add comment

I created another large monster for one of our large larps in New Zealand.

enter image description here

We named him "Boris" while we were building him and the name stuck. The guy wearing it is about 6'3" and he looks out the mouth.

He's constructed from five foam mattresses that are about 4" thick. They're rolled into tubes and glued using a special contact adhesive recommended by the foam supplier. There is a zip down the front and the head is removable (it's attached by some elastic and toggles).

Total material cost about US$350-400 and a few long nights. None of it is complicated, but it's a lot of work.

Photo from my mate Scott at Reality Dysfunction

share|improve this answer
    
How did you do this? –  Pureferret Dec 5 '13 at 23:43
add comment

My local LARP crew builds models in foam, latex and wood so that the creature is to scale. Some creatures (spider queen for one) were fixed -- but combat against them was not an option.

share|improve this answer
    
You mean like this ? That takes a lot of time and effort, even though it is a good solution. –  Pureferret Dec 12 '11 at 16:47
    
@Pureferret: LMAO ... Kinda but better? ^_~ –  Sardathrion Dec 12 '11 at 16:54
    
You weren't there...it was epic! :D –  Pureferret Dec 12 '11 at 16:56
add comment

Our local LARP built a minotaur clockwork golem a year or so ago. The player was able to see out of the painted mesh on the "neck".

What we did to represent the size of the monster was to make him quite tall. That seemed enough.

Golem

share|improve this answer
    
+1. Shame there is no one next to it to give it (more) scale. –  Sardathrion Dec 11 '13 at 16:33
    
Yeah, we always forget to take enough photos. ^_^;; The monster is over 7 feet tall. –  Gustav Bertram Dec 11 '13 at 16:57
add comment

protected by Brian Ballsun-Stanton Dec 11 '13 at 21:53

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.