Take the 2-minute tour ×
Role-playing Games Stack Exchange is a question and answer site for gamemasters and players of tabletop, paper-and-pencil role-playing games. It's 100% free, no registration required.

I'm going to run the Pathfinder's Beginners Box scripted adventure that has a dungeon map printed.

This is not only the first time GMing, it's my first time playing an RPG. All of the party are new to RPGs too,

To keep the layout of the dungeon hidden (to keep it mysterious and "unexplored"), I'm going to use crumpled tissue paper to cover rooms of the dungeons until they're explored acting like a fog of war.

If I explain to the players exactly what this tissue paper is for, and lift it as they move through the dungeon, could this have any unintended negative consequences?

share|improve this question
3  
Hello and welcome to the site! Best wishes for your first game. –  Tynam Jul 4 '12 at 9:54
4  
Put some extra blank pieces of paper down with the map to obfuscate where it might go :) –  Rob Jul 4 '12 at 12:05
3  
When I do this, I make sure to use post-its to keep the cover directly on the other side of a door from inadvertently getting pushed. Only downside that I've encountered is with secret doors. They have to not me on the map at all, and the path on the other side of it has to be covered. –  Eugene Katz Jul 10 '12 at 18:26

7 Answers 7

up vote 32 down vote accepted

Aside from being unwieldly, prone to soda spills, sudden gusts of wind and players taking a peek…?

:-)


Personal opinion: As nice as professionally-printed dungeon maps might be, personally I much prefer sketching the current part of the dungeon on scratch paper as the players advance.

This has several advantages:

  • it is clear to everyone that my sketch is only a rough representation of reality (so players still listen to my descriptions and use their imagination instead of looking at a pretty printing);
  • I don't have problems with inadvertently uncovering unexplored parts ("I won't open the door! I can see there's a dragon on the other side!");
  • players can draw their own positions, sketch tactics etc., without me going "Argh! My map!";
  • frequently, ready-made maps contain GM-only information ("If I look into that corner with the little 'four' printed in it, what do I find?");
  • players are unclear about size and overall layout of the dungeon ("There has to be more in that direction, look at how much still-covered map there is!");
  • I get to chose the size of the map (A3, A4, A5, Post-It), adjusted to the size of the playing area;
  • I can change the layout of the dungeon on the fly if the events demand it;
  • since angles are never perfect, and I remove the paper with the current room(s) regularly to draw the next room on a fresh piece of paper, players can actually get a bit lost. They do have their chalk marks, sure, but they can't really put together a "perfect" map of the surroundings, just like they couldn't in reality.
share|improve this answer
5  
I can change the layout of the dungeon on the fly if the events demand it That's nice. –  StuperUser Jul 4 '12 at 10:13
3  
The group I play with uses a plastic-coated A3 and a white board marker - works incredibly well. –  Wilerson Jul 4 '12 at 12:10
9  
@StuperUser: Never underestimate the amount of winging you're going to do. In my experience, the best GMs are not those who can think up the most convoluted story arcs, but those who can ad-lib most gracefully if players don't act to plan, and still keep the story going. –  DevSolar Jul 4 '12 at 12:22
4  
I like a lot the idea of drawing every room on a different piece of paper and only let them know the one they are in... :) –  pconcepcion Jul 4 '12 at 20:56
11  
@pconcepcion: Hint: When you remove a room from the table, mark it with some code in the corner, and keep a "master map" that shows which room is where. ("You leave to the south, and return to... this room.") It's one thing for the players getting lost, it's another for the GM to inadvertently have rooms change position within the dungeon. Then again, having rooms change position deliberately can put a nice twist into things - can't do that with a pre-made map either. (Ain't magic great? ;-) ) –  DevSolar Jul 5 '12 at 7:23

Not that I can think of. Cover-the-dungeon-and-reveal is one good method of revealing floor plans gradually, and works perfectly well (assuming your table is large enough for the full map).

There is a minor possible issue: crumpled tissue paper is light and easily knocked around during play. This depends on your table, weight of paper and players, so it's hard to know if this is a problem for you. If it is, consider using a weightier, dark-coloured paper.

share|improve this answer

Paper should be all over the map, not only where rooms are printed - empty spaces should be fogged too.

That way - if they want to escape monsters into uncovered area - they won't have a clue where is a better terrain, be it bigger, or with more turns, or with possible exit near the map's edge.

I also dislike such way because players can judge how BIG the whole dungeon is. How much food to bring, how long time it will take them etc. But that's really an issue with more advanced players worrying about details ;)

share|improve this answer
1  
You can prevent them guessing the dungeon size by making it multi-level. ;-) –  Hand-E-Food Jul 5 '12 at 1:19
    
Nah, and print all those levels on paper? Too much work for such a little effect. Pareto principle after all. Better just to use pencil ;) –  naliwajek Jul 5 '12 at 6:55

Use old black t-shirts instead of paper. They are heavier, can bend around corners, and can be pushed out of the way little by little.

share|improve this answer

I sometimes create my own maps by using Microsoft PowerPoint template with 1" squares, and applying textures to each square. I print them out and cut out each room separately. As the party navigates the map, I pull out any rooms they witness and tape them onto the rest of the map. Even twisty corridors can be revealed one section at a time.

There is no shape constraint. You can create maps larger than your table. When the map becomes too big, you can detach previously travelled sections. They can't assume that it's a square and their destination is contained within a certain area. It keeps things mysterious.

One of my maps consisted of crossing a lake, then climbing through a ravine to an exposed, underground bunker. Once they reached the bunker, I removed the lake and most of the ravine and started the bunker portion of the map.

share|improve this answer

Fancy maps tend to be more for the DM/GM than the players in my experience. Typically a good party should be taking notes and drawing their own map anyway as you describe things. If layout is critical (like a fight) then a whiteboard or a battlemat with erasable options is the best and you can do rough sketches of the room that way for the temporary fix.

share|improve this answer

Another thought is if you have a computer and large screen available, you could created the map as a layered graphic with the top layer solid black. You could then erase parts of the top layer as the dungeon was explored, displaying the map underneath.

share|improve this answer
    
That sounds like a good way of doing it. Have you used rpgwithme or any other software for rpging that could be useful for this? –  StuperUser Feb 19 '13 at 9:54

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.