Skip to main content
Commonmark migration
Source Link

How is the damage of the chaos bolt spell (XGtE, p. 151; GGtR, p. 67) applied?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.

 

If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again.

 

A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:

I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted).

  • Would Bob take the 8+8+6, and then I would roll to hit and damage Ted?

Or:

  • Would the damage to Bob not happen, and instead I would roll to hit and damage Ted?

How is the damage of the chaos bolt spell (XGtE, p. 151; GGtR, p. 67) applied?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.

 

If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again.

 

A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:

I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted).

  • Would Bob take the 8+8+6, and then I would roll to hit and damage Ted?

Or:

  • Would the damage to Bob not happen, and instead I would roll to hit and damage Ted?

How is the damage of the chaos bolt spell (XGtE, p. 151; GGtR, p. 67) applied?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.

If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again.

A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:

I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted).

  • Would Bob take the 8+8+6, and then I would roll to hit and damage Ted?

Or:

  • Would the damage to Bob not happen, and instead I would roll to hit and damage Ted?
Tweeted twitter.com/StackRPG/status/1083513905157193728
adjusted title to reflect question in body; added DNDBeyond link and page number; fixed formatting
Source Link
V2Blast
  • 50.3k
  • 10
  • 223
  • 306

How does Does the damage of the Chaos Bolt damage settle on aspell against the first target resolve before it jumps to another creature?

How is the damage of the chaos bolt spell (XGtE, p. 151; GGtR, p. 67) applied?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

Chaos Bolt (XGtE, p. 151)
You You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.
If

If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again. A

A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:
I'm

I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted). Would Bob take the 8+8+6, and then I would roll to hit and damage Ted,
OR
would the damage to Bob not happen, and INSTEAD I would roll to hit and damage Ted?

  • Would Bob take the 8+8+6, and then I would roll to hit and damage Ted?

Or:

  • Would the damage to Bob not happen, and instead I would roll to hit and damage Ted?

How does Chaos Bolt damage settle on a target?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

Chaos Bolt (XGtE, p. 151)
You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.
If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again. A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:
I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted). Would Bob take the 8+8+6, and then I would roll to hit and damage Ted,
OR
would the damage to Bob not happen, and INSTEAD I would roll to hit and damage Ted?

Does the damage of the Chaos Bolt spell against the first target resolve before it jumps to another creature?

How is the damage of the chaos bolt spell (XGtE, p. 151; GGtR, p. 67) applied?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage.

If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again.

A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:

I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted).

  • Would Bob take the 8+8+6, and then I would roll to hit and damage Ted?

Or:

  • Would the damage to Bob not happen, and instead I would roll to hit and damage Ted?
added 47 characters in body
Source Link
KorvinStarmast
  • 144.3k
  • 36
  • 477
  • 767

It may sound straight forward, but I've read the spell's description about 20twenty times now and it doesn't specifically say.

Chaos BoltChaos Bolt (xgeXGtE, p. 151) 
You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage. 
If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again. A A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? DueDoes the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of itthis spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

ExExample: I'm
I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I I roll to attack Bob, hit, roll damage. Both of my: result is 8+8+6 (let's say maxmax damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted). Would Bob take the 8+8+6, and then I would roll to hit and damage Ted? OR would,
OR
would the damage to Bob not happen, and INSTEAD I would roll to hit and damage Ted?

It may sound straight forward, but I've read the spell's description about 20 times now and it doesn't specifically say.

Chaos Bolt (xge. 151) You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage. If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again. A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of it, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Ex: I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage. Both of my 8+8+6 (let's say max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted). Would Bob take the 8+8+6, and then I would roll to hit and damage Ted? OR would the damage to Bob not happen, and INSTEAD I would roll to hit and damage Ted?

It may sound straight forward, but I've read the spell's description about twenty times now and it doesn't specifically say.

Chaos Bolt (XGtE, p. 151) 
You hurl an undulating, warbling mass of chaotic energy at one creature in range. Make a ranged spell attack against the target. On a hit, the target takes 2d8 + 1d6 damage. 
If you roll the same number on both d8s, the chaotic energy leaps from the target to a different creature of your choice within 30 feet of it. Make a new attack roll against the new target, and make a new damage roll, which could cause the chaotic energy to leap again. A creature can be targeted only once by each casting of this spell.

You roll the attack, and let's say it hits. Then you roll 2d8+1d6, let's say both d8s are 5, meaning it would jump.

Here's the question. Does the damage resolve on the first target THEN attack the second and resolve on the second as well? Due to the "wild magic" perception of this spell, it would "hit" the first guy, but not damage him, instead moving to the second guy, until finally you stop rolling doubles.

Example:
I'm attacking Bob (because screw Bob), and he's got his buddies Ted and Dan. I roll to attack Bob, hit, roll damage: result is 8+8+6 (max damage, because Bob deserves that). That would mean it would jump to let's say Ted (because screw Ted). Would Bob take the 8+8+6, and then I would roll to hit and damage Ted,
OR
would the damage to Bob not happen, and INSTEAD I would roll to hit and damage Ted?

added 1 character in body
Source Link
GreySage
  • 21.8k
  • 8
  • 78
  • 130
Loading
Source Link
Loading