The way Protection from Energy combines with Resist Energy is explicit in the spell descriptions. But nothing is said regarding Fire Shield + Protection from Energy or Fire Shield + Resist Energy, or the three combined.

How do these combinations work?


3 Answers 3


Similar to how damage reduction is handled any reduction to damage taken will not be applied to the victim until the amount of damage is determined.


  1. Make any saving throws/spell resistance checks to determine amount of damage recieved.

  2. Apply damage reduction to this damage.

  3. Apply damage to hapless victim.


So for example, Bob the Wizard has chill variant fire shield (from an ally) and protection from energy (with 60 points left, 6th level caster) and resist energy (10 points of DR, 6th level caster) and gets breathed on by the mother of all red dragons for 200 damage, this doesn't look nice.

Important quote from protection from energy and resist energy :

Resist energy overlaps (and does not stack with) protection from energy. If a character is warded by protection from energy and resist energy, the protection spell absorbs damage until its power is exhausted.

  1. Bob make a saving throw, if Bob succeeds Bob takes no damage (fire shield) if he fails he takes half damage (fire shield). So let's say Bob fails (So we can continue the example) Bob takes 100 damage.

  2. Bob applies damage reduction; Now protection from energy and resist energy overlap, both spells are active but only one works at once. So until protection from energy is used up that's all the resistance Bob gets.

So in this example Bob is taking 100 damage, reduced by 60 points from the protection from energy leaving 40 points of damage left.

Because Bob has more than 10 points of protection from energy resistance left, nothing is applied from the resist energy. But the next time Bob gets breathed on he'll reduce the damage by 10 each time (after saves).

If Bob had only 5 points of protection from energy resistance left then he'd reduce his damage by 10 as the effects overlap. This is because the resist energy isn't applied until protection from energy runs out as the effects do not stack.

So the end result is: Bob takes 40 damage. Bob decides to get out of here!

Side Effects

One additional quirk of all this, like damage reduction if you absorb all the damage from an effect with Protection from Energy or Fire Shield then no side effects are taken.

However Resist Energy only reduces damage (the spell specifically states this) so you could, say, potentially catch on fire if caught in a burst of flame and are protected by Resist Energy but reduce the damage to zero - this gives you another reason to use the higher level (and better in that respect as well) Protection from Energy


I'd apply the fire shield first, both because it's a "shield around the body" and makes simulationist sense that it'd be contacted before the resist/protect.

If one were looking to make the combo "less good," then similar to the reasoning behind prot coming before resist, you'd ablate the protection first, then the resist, then the fire shield because (x-10)/2 > (x/2)-10.


In my opinion, chill shield would be in the area of effect first and take damage first (or more appropriately, act as a buffer). I would handle it like this, using the dragon breath of 200 damage as an example, and protection from energy 6th lvl caster (60 protection), and resist energy 6th lvl caster (resist 10).

  1. Chill shield would reduce
    A. a failed save to 100 damage, or
    B. a successful save to no damage.

  2. A. You're subjected to 100 damage. Protection from energy and resist energy start to apply, but protection from energy applies first. 100 damage gets reduced to 40 after protection. Your protection spell is expired, it was almost like a buffer of sorts as well.
    B. You relax because you're so dexterous, so long as the chill shield spell endures and you make saves, you feel fabulous and take no damage from the breath weapons. "Why did I waste time casting other protection spells?" (Go back to 1A for the answer.)

  3. A. You're still subject to 40 damage. Energy resistance 10 kicks in and reduces the damage to 30.

You must log in to answer this question.

Not the answer you're looking for? Browse other questions tagged .